Laser cutting can put more strain on the material than other methods. Nevertheless, in many cases, the process does not distort the material significantly. However, this is dependent on the parameters, the material's composition, and thickness.

Fremont, CA: Although lasers are not suitable for every application, they do provide efficient material use, flexibility, and a controlled process. One of the benefits of using lasers is that they make little contact with a material. Because the cut width is so narrow, they can be used for small radiuses. However, when working with laser-cutting metal, one may encounter a few difficulties.

Material Considerations

One issue that many businesses face is the material's effectiveness. The machine does not work well as the thickness increases. It is dependent on the power of laser metal cutting machines to cut material that is half an inch or thicker. The limitations are influenced by the vaporization point, heat conductivity, as well as surface tension.

When one highly focuses one's beam and reduces the spot size, one has a sharper cutting tool. For instance, by reducing the spot size from 0.004 to 0.011 inches, one will notice a significant increase in cutting ability.

Distortion Problems

Laser cutting can put more strain on the material than other methods. Nevertheless, in many cases, the process does not distort the material significantly. However, this is dependent on the parameters, the material's composition, and thickness.

When working with thin metals, such as those ranging from 0.001 to 0.005 inches in thickness, distortion is more likely. This is due to the possibility of a recast layer forming on the metal's edge. When the molten material cools, it may cause a warp in one's metal piece.

Opt for a Trusted Source for Laser Cut Metal

There are numerous challenges that one may face when working with laser metal cutting. These include the type of material used and obtaining the proper cut. The good news is that partnering with the right company can assist one in mitigating these issues.